Some consider centralized heating in apartment buildings a relic of the Soviet era, while others consider it an undoubted blessing of civilization. But we all continue to use this heating method.

The main element of such a system is heating radiators for the apartment, which are located under the window in the living rooms of high-rise buildings. Their types and features will be discussed in our article. We will also briefly look at the main advantages and disadvantages of cast iron, aluminum, steel and bimetallic radiators.

Water heated to 95 °C is usually used as a coolant in centralized heating systems. Moreover, it is not purified distilled, but technical grade with dissolved salts and additives.

As a result, the material from which the battery in the apartment is made must easily withstand the effects of temperature changes, moisture, and impurities contained in the coolant for a long time.

To last for many years, an apartment heating battery must:

• withstand operating pressure up to 9 atm (ideally up to 12–15 atm);
• made of metals resistant to chemical and electrochemical corrosion;
• have high heat transfer.

The pressure in apartment radiators fluctuates around 4–7 atm. Much here depends on the number of floors of an apartment building, the temperature outside the window and the operating conditions of the heating network. But during pressure testing, the pressure can briefly rise to 15 atm and higher.

All heating radiators are made of metals (aluminum or iron) - only they are able to withstand the workloads generated in heating systems

Also, the heating device in question must be easy to install, have a presentable appearance and low cost. But, most importantly, it must have excellent heat transfer characteristics.

The main task of the radiator – give the room the heat that came through the water pipes. The more effectively he does this, the better it is for the owner of the apartment.

There are two main criteria for classifying heating batteries:

1. Material of manufacture.
2. Design.

All other parameters are technical characteristics of a specific radiator model.

Features of different designs

The functionality of heating radiators is influenced not only by the material from which they are made, but also by their design.

So, the batteries are structurally:

• sectional(block);
• columnar(tubular);
• panel.

The first two options are a set of several elements assembled into a single heater, and the third is a monolithic block.

Sectional water heating devices include the now widely used aluminum radiators. A classic example of a columnar analogue is an old cast-iron battery.

Option #2 - practical steel

Steel batteries are practical and come in two types - tubular or panel. The first are a direct analogue of the cast iron appliances described above. They have similar heat output and weight, but a more presentable appearance.

The latter are made of two steel sheets welded together and forming a thin layer-cavity inside for water circulation.

This option has higher heat transfer rates, so they are often connected together in several pieces. As a result, the total heat transfer area increases sharply.

Option #3 - durable aluminum

Aluminum radiators are the most common in the household heating market today. This is due to their low cost, durability and light weight, as well as extreme ease of installation.

Among the advantages of aluminum radiators it is worth highlighting:

• high heat transfer rates;
• light weight of the heating device;
• modern design;
• affordable price;
• possibility of completing with a thermostat;
• service life of 30 years;
• no predisposition to paint peeling.

The main disadvantage of an aluminum heater is its demands on the coolant characteristics. The slightest solid suspensions during water circulation begin to scratch the protective coating inside. As a result, aluminum remains unprotected and gradually begins to corrode.

These batteries were originally created to replace old cast iron ones. They were immediately designed taking into account the features of the centralized heat supply existing in Russia.

It’s not for nothing that they are called universal radiators, which can be installed without problems in almost any apartment.

The advantages of a bimetal radiator are as follows:

1. Reliability - operating pressure around 35 atm.
2. Undemanding to the chemical composition of the coolant.
3. High corrosion resistance.
4. Compact and modern appearance of the device.
5. Light weight.

The main and only significant disadvantage of this device is its high price.. They are the most expensive among all analogues. However, these costs will certainly be covered by a long service life and the absence of leaks with floods.

Bimetallic radiators are especially relevant in homes where there are frequent changes in water pressure in the heating system.

Conclusions and useful video on the topic

To make it easier for you to figure out which radiator is better, we have made a selection of videos analyzing the various nuances of these devices.

The following video will help you understand the types of radiators and determine which ones are best suited for specific operating conditions:

When choosing which battery to install in your apartment, you must first of all focus on the parameters of the central heating system.

In an old house, it is often possible to install only cast iron radiators. Aluminum options are ideal for new buildings and five-story panel buildings. And reliable bimetallic analogues are universal devices that are suitable in almost any situation, but cost a lot.

Which batteries do you personally consider the best and which ones are installed in the heating circuit of your house/apartment? Share your impressions of using them, add unique photos of your radiators and useful recommendations for beginners.

When organizing a major renovation of a house or apartment, the list of activities of which includes the replacement or modernization of the heating system, the owner will inevitably face the problem of which heating radiators are best to choose in order to increase the comfort of living and at the same time not lose with the interior design.

Previously, such a question was usually not raised in principle - in addition to cast iron batteries of a single model, inefficient, poorly made steel convectors were only sometimes installed in new houses. Today the situation is different - radiators can differ significantly in material of manufacture, characteristics, and external design. Naturally, you want to install in your apartment the best of those that the budget allocated for renovation allows.

However, when choosing these devices, you need to take into account that not all of them may be suitable for the existing heating system. Having different performance characteristics designed for a certain load and coolant, batteries can either disappoint the buyer with their low efficiency, or even simply not fit the technical parameters.

In addition, in order to achieve proper heating efficiency, it is necessary to correctly calculate and install the required number of sections in the radiators. Just do it V in all conditions and making sure to adhere to installation rules, you can get the desired result.

Currently, the most common types of heating batteries are: The following types of radiators are produced:

— steel, panel and tubular;

- cast iron, having both modern and retro design;

— aluminum and aluminum anodized;

- bimetallic.

To make the right choice, you need to understand in more detail the characteristics, advantages and disadvantages of each type. To begin with, here are a few “dry” numbers, which, nevertheless, can already give an initial idea. Some parameters of various types of batteries are in the table:

	TS	Chg	Al	BM	AA
Maximum pressure, (atmospheres)
- working	6-10	6-9	10-20	35	15-40
- crimping	9 -15	12-15	15-30	57	25-75
- destruction	18-25	20-25	30-50	75	100
Limitation on pH (hydrogen value)	6,5-9	6,5-9	7-8	6,5-9	6,5-9
Susceptibility to corrosion when exposed to:
- oxygen	Yes	No	No	Yes	No
- stray currents	Yes	No	Yes	Yes	No
- electrolytic pairs	weak	No	Yes	weak	No
Section power at h=500 mm; Dt=70 ° , W	85	110	175-199	199	216,3
Warranty, years	1	10	3-10	3-10	30

Abbreviations in the table:

TS– tubular steel;

Chg– cast iron;

Al– regular aluminum;

AA– aluminum anodized;

BM– bimetallic.

Well, now - about each type in more detail.

Steel radiators

They may differ both in their design and in design. They can be made in the form of panels or a certain number of vertical pipes interconnected into one common battery.

Panel steel radiators

Each panel of such a radiator is made of two metal sheets, which are given the desired shape by stamping and joined by welding. Then, in most of the models, the panels are equipped with convector heat exchangers, which contribute to the rapid heating of the air and the creation of a thermal upward flow. After combining all the elements into a single structure, it is painted using a special technology.

In order for this type of radiator to serve for a long time, the coloring must be uniform - you need to pay special attention to this parameter when purchasing.

Prices for panel heating radiators Lideya

panel heating radiators Lideya

Panel radiators are designed for a coolant temperature of 85 ÷ 95 degrees, and for standard operating pressure in a central heating system (up to 10 atmospheres).

Structure of a panel radiator type “22”

Similar batteries have your own classification, which is predetermined by the number of panels and the presence of convector plate heat exchangers between them. Each type is expressed by a specific two-digit number:

• Type 10 consists of only one panel;
• Type 11 is one panel equipped with one convector;
• 21 type - has two panels and one convector located between them;
• Type 22 - consists of two panels and two convectors;
• Type 33 - has three convectors, which are located between three panels.

There may be significant differences between models And by overall dimensions. It is clear that the more panels, the thicker the assembled structure itself, usually from 50 to 155 mm. The length of such a battery can vary from 400 to 3000 mm, and height - usually, ranging from 200 to 900 mm.

Panel batteries are produced with side and bottom connections - the choice for this parameter is made depending on the passage of the heating system pipes and the preferences of the owners.

The advantages of panel batteries include the following:

• Easy to install. The battery has a one-piece design, so it does not need to be assembled from several elements. The panel is hung on brackets fixed to the wall, and the pipes are connected to the heating circuit pipes.
• Due to the small mass of the steel sheet, the panel warms up almost immediately after starting the heating. This promotes good heat transfer both from the surface directed into the room and in the plate heat exchanger, which makes it possible to obtain the desired air temperature in the room quickly enough.
• Compact size and neat appearance allow the panels to fit into any interior.
• The operation of panel batteries in an autonomous heating system allows you to save on fuel, since a relatively small amount of coolant is used to fill the circuit.

The negative features of the panels include the following factors:

• Metal panels do not have an anti-corrosion coating on their inner surface, which is in direct contact with the coolant, which can lead to fairly rapid rusting, leaks, and failure. This is especially typical for central systems, where the coolant is drained in the summer, opening up “wide opportunities” for corrosion processes. And the quality of the coolant also does not always contribute to the duration of trouble-free operation of the devices.
• If batteries are installed in a central heating system, then it will not be possible to avoid water hammer, which the panels may not withstand. Therefore, it will also be necessary to install a reducer that equalizes the pressure and takes the blow.

To get more detailed information about the manufacturing process, characteristics and operating nuances, you should follow the recommended link to a special page on the portal.

Tubular batteries

Tubular steel batteries consist of stacked sections that are welded together. The efficiency of this design will be at the proper level if the required number of sections are installed in the battery, with a total thermal power corresponding to the area of ​​the room.

Tubular radiators can have a very wide variety of different design solutions, and this is one of the criteria that directly influences the choice of this particular type of battery. In addition, tubular batteries can be equipped with a special bracket for drying towels, which is very convenient, for example, for the kitchen, or a top panel that can serve as a seat or shelf for drying shoes.

They are produced in different sizes, the height varies from 200 to 2000 mm, and the thickness, as a rule, from 100 to 250 mm. The ordered length can be any, depending on the heating needs.

These elements of the heating system can withstand pressure from 8 to 15 atmospheres. To avoid damage to batteries due to water hammer, if they are installed in a central heating system, they, like panel ones, will require the installation of a gearbox.

The wall thickness of steel tubular radiators is only 1 ÷ 1.5 mm, so they warm up very quickly and release heat into the room. But this same factor can also be attributed to design flaws, since thin steel is easily susceptible to mechanical damage.

Unlike the panel type, the tubes of these batteries are internally coated with polymer protective films, which protect them from exposure to the aggressive coolant environment, and as a result, from the occurrence of corrosion, which significantly extends their service life.

The advantages of tubular steel batteries include a variety of design solutions in shape and color, the provision of radiators with additional elements, and an original, neat appearance.

This type of battery has only two serious disadvantages, but they can have a much more significant impact on the home heating system than the already mentioned advantages:

• Low heat transfer, which will lead to high energy costs. The batteries heat up quickly, but also cool down quickly, so the boiler will turn off for a very short period of time. The absence of an additional heat exchanger, other than the surface of the pipes themselves, makes the area of ​​active heat transfer very small. This ultimately suggests that tubular batteries are unprofitable to install in an autonomous heating system.
• At the same time, welded connecting seams can be considered a weak point of such batteries - there have been cases of leaks appearing on them after water hammer. The conclusion is quite the opposite - tubular batteries without a gearbox can only be installed in a system with autonomous heating.

In a word, there are a lot of contradictions, and you need to think very carefully before purchasing such heating batteries.

Cast iron radiators

Although today a large number of batteries are produced from modern materials, cast iron elements of the heating system have not been forgotten. They can be found in stores in a transformed form, decorated for modern interiors or for strict “classics”. In some cases, such radiators even play the role of a decorative element and are able to set the tone for the entire design of the room.

In addition, modern cast iron batteries do not require periodic painting, as was the case with old “Soviet” models. They go on sale with a treated and painted surface, which only needs to be wiped or dusted occasionally.

Modern radiators can have different sizes, so they can be selected to suit any size room area. In addition, if old batteries had to be hung on brackets driven into the walls, today you can purchase options that have massive legs on which they are installed and secured to the floor in a specific place for them.

Prices for cast iron heating radiators Konner

cast iron heating radiators Konner

Unlike all other types of batteries, cast iron ones have an important advantage - they will function equally effectively in both autonomous and central heating systems. The main thing is that all connections of sections and pipes are made correctly and reliably - then the cast iron elements will not be afraid of either water hammer or corrosion.

Despite the emergence of new battery options, cast iron continue to be popular due to their excellent heat capacity- ability to retain heat for a long time. They have thick and massive walls that take a long time to warm up, but, having gained temperature and warmed up, when the heat flow along the circuit is turned off, they remain hot for a much longer period than radiators made from other materials. This is due to the properties of cast iron - it is not without reason that it is widely used for the manufacture of heating stoves and or individual components for them.

In specialized stores you can find both domestic and imported versions of cast iron radiators. Countries such as Germany and Turkey, Spain and England, the Czech Republic and Italy are presenting their products - in many respects they compare favorably with those manufactured at domestic enterprises.

• Imported radiators have high-quality smooth or decorated with relief casting surfaces.
• An important functional feature is the high thermal output, even with small dimensions. For comparison, you can take the volume of a traditional domestic battery, which is 1.3 liters, while a Czech-made radiator has a volume of only 0.8 liters, with the same heat transfer. Thus, the foreign version will be more compact and will save a decent amount on coolant and on boiler operation.
• In addition, unlike domestic ones, imported batteries have a perfectly smooth internal surface, which prevents the formation of scale on the walls and significantly reduces the hydraulic resistance to coolant circulation.
• Since any cast iron radiators are resistant to corrosion, they can be used in open heating systems, where a large amount of dissolved air enters the coolant.
• All cast iron batteries have fairly thick walls, which increases their resistance to possible abrasive wear.
• Unlike domestic ones, imported radiators are supplied to stores already painted and do not require periodic renewal of the coating, which will save not only money, but also the time of homeowners.

However, all foreign-made products have a price much higher than the cost of domestic batteries.

The disadvantages of all cast iron batteries include their heavy weight, so they can be hung on all walls or partitions. And the process of mounting it on the wall itself is somewhat more complicated than with other radiators.

Aluminum batteries

Aluminum batteries are only suitable for installation in an autonomous heating system, since they are quite demanding on the quality of the coolant. This type of radiator is quite popular among owners of private houses due to its affordable price, good performance and modern appearance.

Manufacturers set in the passport the minimum service life for aluminum batteries at 10 ÷ 25 years, but they may well last for a longer time. The duration of their “life” will directly depend on the quality of the coolant, the correct installation and operation of the heating device.

Prices for aluminum radiators

Sectional aluminum radiator

This one is designed for a pressure in the system of up to 15 atmospheres, a coolant temperature of 90 ÷ 100 degrees, and the heat transfer of the section can reach up to 200 ÷ 210 W. At the same time, the capacity of each radiator section is only 450 ml, and the weight is 1.0 ÷ 1.5 kg. The individual sections are fastened together into a single battery using a threaded axial connection.

The standard distances between the upper and lower axles are 200, 350 or 500 mm, but it happens that non-standard options are also manufactured with an interaxle distance of 800 or even more millimeters.

Aluminum radiators, just like all other heating devices, have their advantages and disadvantages.

TO benefits Their qualities include the following:

— high level of heat transfer;

- light weight;

— relative ease of installation;

— convenient and wide range of sizes;

— neat, aesthetic appearance;

— as a rule, it is equipped with a thermostat, which allows you to set the desired temperature.

From shortcomings The following are worth mentioning:

— possible risk of gas formation, which can provoke “ airing" and blockage of the heating circuit;

— the possibility of leakage at the connections of individual sections;

— the main concentration of heat is on the fins of the elements.

— susceptibility of some types of aluminum radiators to corrosion processes.

Some problems that can occur with aluminum batteries can be avoided. For example, in order for possible gas formation to paralyze the operation of the system, it is necessary to cut into a common autonomous circuit or install an air vent on each battery. And in the case of an autonomous system, it is generally better to use one that is well adapted to aluminum (this is described in detail in the corresponding publication of the portal).

Aluminum battery sections are made from aluminum alloy using silicon additives, but different models may also differ in the way they are made manufacturing - casting and extrusion.

• The first method involves manufacturing each section separately by pouring the alloy into special molds under high pressure. The silicon present in the alloy gives special strength to the walls of the radiators, and the manufacturing method fully guarantees the tightness of the container.

Batteries made by this method are able to withstand operating pressure in the system reaching up to 16 atmospheres. During testing, the coolant is supplied to this type of battery under a pressure of 25 atmospheres, that is, when characterizing its products, the manufacturer gives a safety margin of one and a half.

Using this technology, sections of various shapes are made, but traditional ones still remain those that have a flat, smooth outer surface - it is optimal for better heat transfer.

• Another method of making sections is the extrusion method. Using this technology, the melt is pressed through forming nozzles - the desired profile of the workpiece is obtained. This is followed by cutting the profile into individual parts.

Then the finished sections are assembled into a single structure. Batteries made in this way have a lower cost, but during operation they cannot be increased or made smaller - the design is non-removable. The quality of such radiators is also lower, since the joints of the sections (with seals or even with special glue) under unfavorable circumstances may leak and cannot be repaired.

Aluminum batteries with anodic oxidation

There is another type of aluminum batteries. They are made from metal that has a high degree of purification, and also undergo a stage of anodic oxidation - which is why the term “anodized aluminum” is often used. With this special treatment, aluminum slightly changes its structure, and if conventional aluminum radiators are susceptible to oxygen corrosion, then anodized sections withstand this influence with dignity. In such structures, batteries are assembled using couplings that are secured to the outside of the sections.

Anodized sections for radiators are made by casting, and in appearance they are almost no different from conventional aluminum batteries. Therefore, when purchasing them in a store, you must carefully study the passport, which should be attached to such products.

The internal surfaces of this type of radiator are absolutely smooth, so there are no obstacles to the circulation of coolant. Their upper limit of operating pressure is much higher than that of conventional aluminum ones, and ranges from 45 to 75 atmospheres.

Naturally, due to their outstanding technical characteristics, the cost is also significantly higher. But still, in order for aluminum batteries to last as long as possible, it is worth choosing radiators of this particular type.

Bimetallic batteries

In terms of reliability, bimetallic radiators are, perhaps, second only to cast iron ones. They are produced according to a combined principle, from two metal alloys - the inner part is made of a stainless steel alloy, and the outer part is made of aluminum coated with a layer of enamel.

Bimetallic batteries also consist of sections that are connected via a threaded connection. At the same time, their exceptional reliability is based on the fact that the outer aluminum casing does not come into any contact with the coolant, but serves only as an effective heat exchanger (thanks to the highest thermal conductivity of this metal) and somewhat of a decorative element. And water or antifreeze circulates through channels made of a steel alloy, which is more resistant to pressure loads and oxygen corrosion. Thanks to this, such batteries can easily withstand pressure surges of up to 35 ÷ 40 atmospheres.

These qualities of bimetallic batteries make it possible to install them, without any restrictions, both in the central heating system of high-rise buildings and in the autonomous heating system of a private house. The only thing is that in the second case it would be desirable for them to create the necessary pressure, otherwise they will not function at full strength, losing a number of their advantages. This means that natural circulation will not work here, and it is necessary to install a circulation pump in the autonomous system.

Bimetallic batteries are quite expensive - their price is, in any case, much higher than that of steel or conventional aluminum ones, but this is fully justified by their high reliability and long service life. In fact, high cost can be called the only drawback, while they have much more advantages:

• The high thermal conductivity of the outer aluminum “shell” makes it possible to quickly heat the room.
• The corrosion resistance already mentioned above.
• Compactness and aesthetic appearance, thanks to which the radiators will fit perfectly into any interior style.
• Bimetallic batteries do not require special care or periodic painting, as they are covered with a two-layer hardened polymer coating.
• Ability to withstand high temperatures and increased operating pressure, thanks to the internal steel casing.
• Relatively small weight, ease of installation, which can be carried out without the help of specialists.

The appearance of bimetallic radiator options is somewhat similar to aluminum batteries, but the difference in price is quite significant. When purchasing, sometimes it is even impossible to distinguish between two adjacent types of radiators, so it is better to purchase them in specialized stores or from trusted suppliers. Be sure to require technical documentation.

Prices for popular heating radiators

When choosing, you should not save, because by buying cheap, low-quality products, you can doom yourself to another, completely unplanned and unwanted repair in two or three years. Installation by the owner of radiators that are unsuitable for the existing heating system can ruin not only the flooring in his own apartment, but also lead to serious problems with flooded neighbors below. So, saving on little things can lead to significant costs later.

Therefore, when purchasing any product, it is necessary to study not only the passport with the specified technical characteristics, but also the certification of the product with the manufacturer’s warranty obligations. This is important to do in order to avoid buying fakes, which are very similar to the “brand” sample in appearance, but still remain of low quality.

To “consolidate the material”, it is suggested to watch a video lesson that will help answer the question: “Which heating radiators are better?”

And one moment. It is important not only to decide on the type of radiators - the total thermal power must correspond to the parameters of the room where they are installed. To carry out such calculations, we suggest using a special calculator located below.

When the question of which heating radiators is best to choose for a private home appears on the agenda, there are many who nostalgically recall Soviet cast-iron “accordions” - although bulky, they are hot and warm the room well. Indeed, at one time such batteries worked “excellently,” but now they are deteriorating and are considered obsolete. They have already been replaced by new, more efficient, convenient and cost-effective models.

But the main problem is that there are many diametrically opposed opinions regarding new radiators. And in practice it’s the same: you go to neighbors who have installed modern radiators at home - some are warm, while others are cold. At the same time, both places have almost identical heating batteries - that is, which of them is better for a private home does not always depend on the specific model. In our article we will try to figure out which heating radiators are best for a private home.

Warmth in the house does not always depend on the quality of the selected radiators Source kp.md

Features of heating networks in a private house

Unlike multi-apartment buildings, an autonomous heating system is installed in a private house, that is, it does not depend on the central boiler room, which means that the pressure in the network and the temperature of the coolant will be completely different. Therefore, when choosing a radiator for a private home, you need to consider the following points:

• In private houses, the pressure on the coolant, and with it on the tanks and radiator pipes, is much less than in multi-storey buildings. Thus, the batteries do not experience overload, so you can choose any, including thin-walled models.

There is a horror story among residents of apartment buildings about pipes bursting due to water hammer due to sudden pressure surges in the water supply. In fact, there can be no water hammer even in apartment buildings, not to mention heating systems in cottages. But in private homes, especially those in which people do not live all the time, another problem may arise - freezing of water in the pipes. It is in this case that the batteries may simply burst if you forget to drain the water from the system before leaving.

Even cast iron batteries cannot always withstand system freezing Source ir-leasing.ru

• In a private house, the length of the pipeline from the heat source (boiler, stove) to the radiator is very short compared to multi-story buildings. Therefore, heat loss is minimal, and the coolant is more heated. Conclusion: in a private house there should be radiators that can withstand high-temperature coolant.
• A little liquid is needed to fill the heating system, so you can add antifreeze or ethyl alcohol to it. This protects pipes and radiators so that they do not freeze if the boiler is turned off for a long time.

Adding antifreeze to the heating system Source homediz.info

• When choosing heating radiators, which ones are best for a private home should be determined based on the size of the heated area. In cottages there is a lot of space, and therefore energy consumption for heating is also large. It is advisable to install batteries that will warm up your home at a minimum cost.

Guided by these simple rules, you can buy the optimally suitable model.

Classes of heating radiators and their types and features

The principle of operation of a radiator is to transfer heat to the surrounding space from the coolant fluid circulating in this heating device.

The autonomous heating system (AHS) consists of:

• boiler;
• pipelines;
• thermal elements.

Autonomous heating system Source gidroguru.com

The table shows the main types of thermal appliances:

In addition, heating devices are divided into the following classes; let’s consider a unique rating of heating radiators from this side:

Sectional

They consist of heating sections that are connected to each other. The more sections, the more heat they will transfer to the surrounding space. To prevent the room from overheating, special thermostats are installed on the radiators to regulate the temperature.

Thermostatic tap for temperature control Source drive2.ru

Standard cast iron radiators are also sectional: heat from them is transferred in the form of infrared radiation, evenly distributed throughout the room - top, bottom and middle. Such batteries have large dimensions and thick walls, which accumulate enough heat so that it is emitted in the infrared spectrum. It is this method of heating that is considered optimal for human health, although it must be borne in mind that part of the heating also occurs through convection.

Thanks to the thick walls, such batteries have high thermal inertia - therefore, after turning off the AOS, the radiators remain hot for a long time. Cast iron is not very susceptible to corrosion and is not afraid of harmful impurities in the coolant - the service life of such devices reaches 50 years. One of the disadvantages is the heavy weight.

Aluminum radiators have good heat transfer (1/2 radiation + 1/2 convection) and quickly warm up the room. Compared to cast iron, they are more lightweight, and in general, the ability to transfer heat into the room is several times higher than that of cast iron and steel.

Sectional radiator Source isu.org.ua

An additional advantage of modern models is the ability to regulate the temperature using a valve with a thermal head. The metal surface is coated with a protective coating, which increases its service life. The cost of aluminum radiators is low, and therefore the prices are more affordable.

Aluminum radiators cannot withstand high overloads, so they are not used in central heating systems (CHS). They break due to pressure surges, the presence of rust or sand particles in the coolant. Chemical additives are not allowed in liquid composition.

Bimetallic heating radiators consist of external aluminum plates and steel pipes located inside the sections. They are valued for their reliability and durability, but are not cheap. Equally well suited for centralized and autonomous heating systems.

Source nehomesdeaf.org

Radiators are also produced that have only steel-reinforced vertical pipes. These are no longer completely bimetallic devices; they are less corrosion resistant. Among their advantages, it is worth noting their high thermal conductivity, which is higher than that of real bimetallic radiators.

Tubular

Steel tubular heating devices give off heat well, are economical in terms of energy consumption, and heat up quickly. Their disadvantage is that they are sensitive to oxidative processes. If the coolant fluid does not fill the steel radiator reservoirs, it will begin to corrode. Another weakness of a steel radiator is its hypersensitivity to water quality. Even if the water is considered good by usual standards and can be drunk, it is recommended to install filters to minimize the formation of scale.

A steel tubular radiator can be placed in a narrow niche Source bouw.ru

The sizes of steel tubular radiators are from 30 cm to 3 m. The number of rows of tubes is 1–9. They are considered very reliable - the permissible operating pressure for devices from a number of Russian manufacturers reaches 15 atm. Radiator reservoirs are designed to hold a large volume of liquid, so they quickly reach the required temperature levels when you need to increase or decrease power. The method of heat transfer is radiation and convection.

Steel radiators are also used as heated towel rails, which, in addition to drying clothes, provide additional heating in bathrooms

Steel tubular radiator bench Source krovati-i-divany.ru

Floor radiators-benches with support legs are steel tubular heating devices with a seat in the form of a wooden board on top. They are connected to the heating system in the same way as conventional radiators. They can also serve as the main heating device in rooms such as the kitchen, bathroom, hallway.

Panel

These steel radiators are a rectangular panel that acts as a heating device. The panel consists of 2 ribbed sheets welded to each other; plates with a U-shaped relief are placed inside.

Steel panel radiator Source 999.md

Operating pressure is 6–8 atm, high sensitivity to pressure changes, therefore they are used only in autonomous heating systems for residential and commercial premises. Such radiators can consist of 1, 2, 3 heating plates. React quickly to temperature changes. The main method of heat transfer is convection. The choice of sizes of such devices is wide enough so that they can be selected for a room of any size.

Sectional panel radiator Source it.decorexpro.com

Internal structure of panel radiators with 1, 2, 3 heating plates Source deal.by

Ceiling thermal panels consist of steel plates to which pipes intended for coolant are welded. Their use is advisable in rooms with high ceilings from 3 to 20 m. Heat transfer is carried out by radiation.

Ceiling panels Source waterinpanel.com

Lamellar

Plate heating devices consist of horizontally arranged pipes to which metal plates are welded, thereby increasing the surface area for heat transfer. Heat transferrs can additionally be covered with protective covers. The advantage of such radiators is their reliability - they can be used for centralized and autonomous heating. The main method of heat transfer is convective, so the space is heated unevenly: it is much warmer on top. Mainly used for offices, corridors, garages and utility rooms, but there are also models for residential premises.

Modern plate batteries Source otoplenie-gid.ru

Rules for the location of batteries in the house

In order for the system to work properly, installation rules must be strictly followed. Although the installation technology is not complicated, it has its own nuances, so the work must be carried out by specialists.

Important! If radiators are not installed correctly, they are not covered by the warranty.

In order to avoid heat loss and uneven heating of the room, when installing devices it is necessary to observe indentations and choose the correct location:

• The most suitable option for the battery is considered to be a place under the window, i.e. where the heat loss is the most significant. The radiator width must be at least 70% of the window width. Mounted clearly in the middle.

Correct battery placement Source koffkindom.ru

• Leave at least 10 cm from the battery to the windowsill, as well as to the floor. The optimal distance between the floor and the radiator is 12 cm. It is not recommended to leave more than 15 cm.
• The battery is fixed at a distance of 5 cm from the wall.
• You can stick heat-reflecting material behind the radiator - then some of the heat will not go into the wall, but will return to the room.
• If the radiator is planned to be placed not under the window sill, but on the wall, then the distance between them should be at least 20 mm.

Video description

For more information about installing batteries in a private home, watch the video:

Calculation of the number of sections

It is not necessary to look for the most expensive heating devices to make the room comfortable. The main thing is to correctly calculate the number of sections. If the rooms are standard, then this greatly simplifies the calculations.

Often they resort to calculations based on the volume of space because they are simple, but at the same time give fairly accurate results.

1. 1 m³ requires 41 W of power. If good double-glazed windows are installed and heat loss is minimal, then the figure drops to 34 W.
2. Room volume (m³) = area (m²) × height (m).
3. Required heating power for the entire room (W) = room volume (m³) × 41 W (or 34 W).
4. In the technical data sheets of devices, manufacturers indicate the heat transfer of one section.
5. The total power (the value calculated in point 3) must be divided by the heat transfer of one section. The resulting number is the number of sections.

For example, the required thermal power is 2890 W, and the heat output of one section is 170 W. Then for this room you need to purchase 17 sections.

In a non-standard room, calculations are made using a more complex formula Source rmnt.mirtesen.ru

If the room is non-standard, the calculations become more complicated. To calculate the total power, the features of double-glazed windows (double or triple), thermal insulation parameters of the walls, the ratio of the sizes of windows and floors, ceiling heights and other parameters are taken into account. Designers calculate all this using specialized software.

Which radiators to choose for a wooden house

Heating a wooden house (we are talking primarily about log houses) indeed has its own characteristics, since the thermal conductivity of wood is low and depends on its species. In addition, it is necessary to ensure maximum fire safety. But in general, the issue of providing heat, as well as safety, rests primarily on the correct installation of the heating system, the choice of boiler and the number of radiators. There are no restrictions on the type of radiators here: steel, cast iron, bimetallic, aluminum - all of them can be used in a wooden frame.

Any type of radiator is suitable for a wooden house Source pinterest.com

Which heating batteries to choose for a private home and cottage

It is not difficult to select batteries for a private home, because the autonomous heating system operates without significant overloads, which a centralized system experiences. Here you can connect any radiators, focusing on the required power, quality, efficiency, and cost of the device.

Many owners of private houses prefer aluminum radiators. They are cheaper than cast iron, more economical to operate and have higher heat transfer rates, and the sensitivity of aluminum devices to water hammer in an autonomous heating system can be neglected.

If you want to choose batteries based on the brand name, then you can take into account the unspoken rating of aluminum heating radiators for a private home. The top positions here belong to the brands Calidor, Global, Rifar, STI, which are well suited for operation in Russian climatic conditions.

Modern radiators will provide a comfortable atmosphere in the room even in the coldest weather Source nehomesdeaf.org

Steel radiators are no less common, which is not surprising, because they are reliable, affordable, can warm up quickly and have good heat dissipation. Here, in the ranking of steel heating radiators for a private home, the leading places are occupied by Kermi, Purmo, Zehnder, Sunerzha.

Among the worthy brands producing bimetallic radiators are the Russian Rifar and the Italian Global. Those who decide to purchase cast iron heaters should pay attention to Konner (Russia), Guratec (Germany), Retro Style (Russia).

As a result, all radiators are universal, which means posing the question of which heating radiators are best for a private house with a gas boiler is not entirely correct, because when choosing, they are mainly guided by the required power, the features of the room and the possibilities of the budget.

Video description

To see the differences between radiators, watch the video:

Radiator prices

The cost of heating devices varies significantly depending on the following factors:

• brand and country of origin;
• material and production technology;
• design.

Italian, German, Finnish, and Czech batteries are more expensive than Russian ones, but in terms of their technical and operational characteristics, products from domestic manufacturers are not much inferior and even superior to many foreign analogues.

Buying heating radiators for a private home is quite expensive. But if you make the right calculations and select cost-effective devices, then costs can be significantly reduced.

The average cost of aluminum radiators per section is in the range of 1227–8200 rubles, bimetallic devices – 3000–11900 rubles. The cheapest of them can be purchased at a price of 1100 rubles. The range of prices for steel radiators is also quite wide: from 830 to 60,000 rubles. Steel models costing from 3,500 to 26,000 rubles are popular. Inexpensive cast iron batteries can be purchased for 500–1000 rubles. Cast iron appliances are in demand for RUR 3,000–8,000.

Retro-style batteries can be found from 8,000 rubles.

Cast iron batteries in retro style Source gidroguru.com

If batteries are needed for an entire house, then even inexpensive devices cost a pretty penny. In addition, costs will be added for related products: valves, thermostat heads, brackets and other parts.

Conclusion

Correct installation of the heating system in general and any of its components in particular requires specialized knowledge, without which it is difficult not only to install, but even to select all the components. As a result, you need to turn this question to professionals - experienced craftsmen will make accurate calculations and take into account not only the footage, but also other features of the room, and will tell you which heating is best for a private home in your case. They dismantle the old batteries, quickly and, most importantly, correctly, install new ones. They will check the operation of the heating system and provide technical and warranty documentation.

Heating radiators - a range of models for apartments and private country houses from Russian and European manufacturers.

Our assortment includes a large selection of heating radiators both for apartments (centralized heating in an apartment building) and for a private country house (autonomous heating system). Famous Russian and European brands, there is an exposition with exhibition samples.

Types of heating radiators presented in the Dom-Thermo store:

• Bimetallic heating radiators.
• Aluminum heating radiators.
• Steel tubular design radiators.
• Water heating convectors.
• Antique cast iron retro batteries

Among the classic radiators, special attention is deserved, which not only perform their main role, namely heating the room, they are also able to decorate your interior, becoming a bright element of decor!

Radiators of this type are often quite demanding on the quality of the coolant; they are often not designed to work in a high-pressure system. European brands have become quite expensive today.

As an alternative to expensive designer radiators from Europe, you can consider Russian ones. The collection includes models in vertical and horizontal versions; the front panel of the radiator can be made of painted steel, tempered glass, artificial stone and natural wood.

It is especially worth noting the possibility of applying a drawing or photograph on the front panels of designer radiators. An important point is the possibility of using these devices in centralized heating systems of apartment buildings, because permissible operating pressure pressure 16 atm.

For heating apartments (with a centralized heating system), the most popular option for heating radiators are bimetallic radiators; they usually have an optimal price/quality ratio.

Among radiators of this type, it is better to choose devices with steel collectors, i.e. they completely eliminate contact between aluminum and the coolant, for example, or GLOBAL STYLE. The first option is produced in Russia, using modern European equipment, RIFAR Monolit radiators are entirely welded (without twists between sections), this is a big advantage over classic sectional radiators, namely:

• Enormous margin of safety - up to 100 atm.
• There is no “left-hand thread”, on both sides of the radiator there is 3/4" right-hand VR.
• The absence of gaskets between sections undoubtedly adds reliability to heating radiators.
• Possibility to install battery without use