Reading time ≈ 6 minutes

You can make your interior unique and original with the help of unusual pieces of furniture, for example, a table with an infinity effect. Making such a thing yourself will not be difficult if you use simple instructions. The finished product will organically complement any modern interior and will cause genuine delight among household members and guests!

Table with LED lighting.

Feature of the table

Externally, the table is not much different from any ordinary coffee table. However, as soon as you turn on the backlight, the tabletop of the product begins to flicker and glow with hundreds of lights, creating the illusion of infinity. I want to admire such magic all the time, but those who are indifferent to unusual table will not be found either among adults or among children.

A backlit coffee table looks especially impressive when the lights are off. evening time days.

The infinity effect is achieved thanks to the special design of the tabletop - its box consists of two mirrors, and a diode strip is installed on the sides. In this case, a translucent mirror is selected for the top cover so that the light pattern is more noticeable and pronounced.

The design of the product is shown in more detail in the photo below:

Design.

You can turn on the product using remote control or a special switch on the box.

To illuminate the tabletop, you can choose diodes of any desired shade or combine several colors. But experts especially recommend taking a closer look at the red diodes - due to slight dispersion, the endless tunnel acquires more depth.

Such unusual item furniture is perfect for both home use, and for placement in the office. It can be made in absolutely any size and from any materials.

Table with lilac lighting.

Materials and tools

You can make an exclusive piece of furniture with your own hands. To do this, prepare necessary materials, tools and follow the step-by-step instructions.

To make a table you will need:

• boards for the frame (wood or particle board);
• mirror according to tabletop parameters;
• translucent mirror. The dimensions should be 10 cm larger than the bottom mirror;
• self-adhesive diode tape, length depending on the size of the table, but not less than 1.5 m;
• materials for connecting the tape: controller, programmer, wires, power supply with USB;
• consumables: sandpaper, glue, screws, metal corners.

Instead of a translucent mirror for the top cover, you can use ordinary glass and cover it with tint film yourself.

Idea: to reduce work in any furniture store you can purchase the simplest table in design and use it as a ready-made base.

Why choose LEDs:

1. They give a rich, beautiful, deep shade.
2. Longer service life without burnout (the number of on/off switches does not affect the service life).
3. No heating.
4. High efficiency.
5. Various colors.
6. Reasonable price.
7. Light bulb safety.

Assembly

Before assembly, it is necessary to develop a drawing of the table, calculate the distance between the mirrors, the number of diodes, and think about the location of the electrical elements.

To get an idea of ​​what the twinkling lights will look like in finished product, just place any light source between the bottom and top of the table and look at the result.

Regarding the distance between the mirrors, everything is individual and depends on your wishes. But often the average value is chosen - 8 cm. To calculate the depth of infinity, the distance between the covers must be multiplied by 16. Also keep in mind that the depth of the tunnel will depend on the light transmittance of the top cover. After all the calculations, you can proceed directly to assembly.

Step-by-step instructions for making a table with an infinity effect with your own hands - making the base:

1. From bars with a cross section of 5*5 cm and metal corners you need to make the frame of the future table. For fastening, use screws and a screwdriver.
2. Using sandpaper, carefully sand all edges and corners to make them smooth and remove burrs.
3. Drill holes for electrical elements using a drill, follow the drawing. The holes need to be sanded tighter.
4. For additional fastening structures, the joints can be treated with glue. After this, the frame must dry for at least 24 hours.

Frame assembly.

Assembling the tabletop step by step:

1. To a sheet of plywood the right size attach boards (section 5*1 cm) along the outer perimeter, and at a distance of 5-6 cm along the inner perimeter. There should be a kind of gutter between the boards - this is where the wiring and electrical elements(see photo above).
2. Place a mirror at the bottom of the tabletop with the reflective side facing up.
3. TO inside smaller frame you need to attach the LED strip using double sided tape.
4. Wiring is installed in the space between the frames.
5. Attach the top mirror cover to the tabletop.
6. The entire structure is held together with screws.

Assembling the tabletop.

At the end of all the work, you should end up with something like this table with a mirror surface:

Finished product with the backlight turned off.

However, you should understand that you can make a table with an infinity effect from any material that you know how to handle - for example, plexiglass, plastic, metal.

1. When working with mirrors and glass, remove the protective film only after completing all processes.
2. Be sure to thoroughly study the diode connection diagram to avoid a short circuit, or worse, a fire.
3. For fastening, use moisture-resistant glue.
4. If electronic parts break down, it will be convenient to have access to them. Free access, therefore it is better to place the controller and programmer not inside the table, but outside - placing it in a neat box and securing it under the tabletop.

Beautiful and original furniture attracts the eye. You can look at it endlessly; you want to surround your space with it both at home and at work. But many people know that designer tables or the chairs are not at all budget-friendly. However, if your hands grow from where you need them and you have a minimum set of working tools, then creating original furniture you are quite capable. The DIY infinity table is direct proof of this. And you will find out by carefully reading our article.

Unusual table

This invention is not the work of a design department. furniture factory or a designer who never leaves the pages of glossy magazines. Instructions for creating such a table with an infinity effect with your own hands appeared on the photo hosting site “Imgur”. In just a few hours, the post received more than 60 thousand views. And it turned out that its author was an American high school student who spent three months preparing the project for the youth forum.

Many people liked his invention, and the instructions for creating a table with an infinity effect with their own hands were immediately tested by dozens of craftsmen. Such simple furniture suitable for any room:

• A table with homemade lighting will fit perfectly into the office interior. Any visitor will immediately pay attention to such furniture and everyone will remember it. It will not be surprising if they want to visit your office again.
• In an apartment or private house, such a table would also be quite appropriate. It is ideal for family and romantic meetings. When fully served, it will cause delight and genuine interest among your guests.

Important! At first, it seems that there is nothing special about this table, as long as the backlight is turned off. But as soon as the LEDs installed around the perimeter of the tabletop start working, a feeling of a bottomless surface appears. It looks amazing with the lights on, but it's even more impressive in the dark with the main lights off.

The illusion of infinity

When creating a seemingly complex 3D table with your own hands, a simple display principle is taken as a basis:

• The infinity effect is achieved quite simply - using LED lighting around the perimeter, made in various color variations.
• The tabletop in this case is a DIY construction of mirrors with an infinity effect.
• To make the light radiation as noticeable as possible, the top glass in this design is made of translucent material.
• Experts advise choosing red diodes. It is he who is less prone to scattering than others, so the visual tunnel will seem deeper.
• To control the backlight, you can use the on/off button or a special remote control.

Some craftsmen use simple garlands when creating a backlit table with their own hands. But it’s still better to use LEDs, as they have a number of advantages:

• More saturated and deeper light than using conventional lamps;
• LED strips are quite durable and resistant to any vibrations;
• Ice lamps burn out much less often; each of them can work continuously for about 100 hours;
• The color range of LEDs is much richer and more varied;
• The service life of the Ice backlight is not affected by the number of turns on and off;
• They are environmentally friendly and safe;
• With all the advantages, LEDs are also much cheaper than conventional lamps;
• Impacts low temperatures they are not afraid.

Important! Today, there are several ways to connect an LED strip to various sources power supply, be it a regular outlet or a computer. It all depends on your imagination and financial capabilities.

Table installation

As we have already said, finding such furniture in a store or market will be quite difficult. Therefore, a DIY table with an infinity effect is the easiest way to get an exclusive item in your interior. To do this, it is enough to know the sequence of actions and focus on the result.

Materials and tools

Of course, when creating a 3D table with your own hands, you cannot do without tools and materials. During this work you will need:

• lumber to create the table itself - both wood and chipboard are suitable for this;
• sandpaper for wood processing, however, if you are working with already ready-made parts, ordered at production, this material can be excluded from the list;
• a mirror of a suitable diameter, which will serve as the base of the tabletop;
• translucent mirror - it should be 10 cm larger regular mirror, since this part is installed on top of the tabletop and covers all parts of the upper structure;
• LED Strip Light— its length will depend on the size of your future table with DIY lighting;
• power supply for LEDs and wires;
• self-tapping screws;
• Super glue;
• Double-sided tape;
• screwdriver

Important! If at this stage you have a question, how to make an infinity mirror with your own hands, then the tinted surface can be replaced with a regular one, having first applied a tint film to it. There is also an alternative to a regular mirror:

• To do this, food foil is glued to the glass;
• glass with mirror coating.

If you are unsure whether glass with a reflective coating is suitable for making coffee table with the infinity effect with your own hands, then you can give him the following test:

1. Carefully, so as not to drop, place the mirror and glass in front of each other.
2. Any light source - an ordinary lamp, and better backlighting, which you will use, place between them.
3. Evaluate the resulting effect.

When preparatory stage finished, it's time to start assembling the 3D table with your own hands.

Drawing development

First of all, you will need a design drawing, drawn up taking into account all the dimensions of the future piece of furniture:

• Before you start assembling the infinity coffee table with your own hands, you need to think about where the electrical elements will be located, affecting the quality of the backlight and creating the desired effect.
• After this, it is necessary to mark the exact location of the socket, switch, and potentiometer on the drawing.

When assembling mirrors with an infinity effect with your own hands, you must take into account one very important factor - the depth of the tunnel that you want to see in the finished furniture. It is achieved by maintaining a certain distance between the tabletop parts:

• if you want to know in advance what the depth of the tunnel will be, then multiply the distance between the mirrors by 16 to get the approximate apparent depth of the tunnel;
• if the result does not suit you, then when drawing up the drawing, take into account and indicate how much you need to increase the space between the parts of the tabletop;
• in most cases, the optimal distance between the lower and upper mirrors is 8 cm, but here it all depends on your preferences.

After the drawing has been drawn up, you can begin assembling the backlit table with your own hands.

Base assembly

In order to get a new one, original item interior, can already be used ready-made furniture. To do this you will need to detach the tabletop. We suggest considering the option of creating a backlit table with your own hands from scratch:

1. First, let's create a strong and durable frame future furniture. To do this, take 4 boards, 4 metal corner, which will hold the structure together and bottom part designs.
2. Now we use sandpaper. We use it to process the surface and edges of each detail of the future table with the infinity effect with our own hands
3. Using a drill, we make holes for the elements according to the drawing. They also need to be sanded.
4. Let's move on to assembly. To do this, we connect the parts in single design, the joints can be additionally glued to increase the possible load on your future table with do-it-yourself lighting.
5. It is better to keep the finished base for 24 hours so that all joints dry out and the structure gains strength.

Assembling the tabletop

Now we move on to creating a mirror with an infinity effect with our own hands, which gives originality to this furniture. As we have already said, you can use mirrors, or you can replace them with glasses with pre-treatment. The second one is more difficult option, and we suggest you consider it. In this case, you should add a glass cutting device to the list of necessary tools. General scheme the work looks like this:

• Cut out a part from a plexiglass blank required sizes. We calculate the width and length at the stage of drawing up the drawing.
• Then we process the edges of this part in order to simply avoid injuries during work.
• We glue a mirror film onto this part of the future table with the infinity effect with our own hands.

Important! It is better to spray the surface with water first, or even better - soap solution. Then, during the gluing process, air bubbles trapped under the film will be easy to remove.

• We cut off the excess film around the edges and wait at least 12 hours for the part to dry thoroughly.

While the mirror is drying, we figure it out general structure table top. In cross section it will look like a layer cake:

1. The base of the structure is a mirror, which is placed with the reflecting side up.
2. The side of the table top body is attached to the main mirror.
3. The front chipboard frame is attached to the installed sidewalls. Its outer diameter, as we have already said, can be equal to the outer frame of the table. But the inner one needs to be made a little smaller.
4. Already on the frame of our table with the infinity effect with your own hands from wood board a translucent mirror is installed.
5. The LEDs are attached around the perimeter of the front frame using double-sided tape. Moreover, this must be done in such a way that the light bulbs from above are not visible, but they should be reflected in the mirror, which is installed as a base. Therefore, the external dimensions of the frame are made larger.
6. The wires are laid inside the frame, which should be hollow. If there is a need to remove the wires, then do it yourself by drilling holes of the required diameter in the legs of the future table with lighting.

After this, we fasten the entire structure of the tabletop with screws and finish assembling the table. It is also worth assembling the control panel. It includes a switch, power slot and potentiometer.

• In order to create a glowing table with an infinity effect with your own hands, you should carefully study the diagram for connecting the LEDs to the power source in advance. If you do something wrong at this stage, it can lead to best case scenario- to a short circuit, in the worst case - to a fire.
• As a rule, before work, glass is pasted over with a special protective film to avoid scratches on the surface during the process. If you do not skip this stage, the surface of your furniture will have a presentable appearance.
• If your table is not square but round, then when cutting glass you will need double-sided tape. Using it, secure the router in the middle of the workpiece, then you will be able to make the circle perfectly even.
• When creating a table with an infinity effect with your own hands, you should use only waterproof glue. Surely, during further operation you will carry out wet cleaning furniture, and no one is safe from knocking over a cup of tea onto the surface.
• It is better to secure the LED strip around the perimeter of the tabletop using high-quality double-sided tape. Before assembling the structure together, you should make sure that the LEDs are securely fastened. Even if a part comes off while using the table, the integrity of the illusion will be compromised, and you will have to disassemble the entire structure to eliminate this defect.
• Control details LED backlight It is best to place it in a plastic box and secure it under the countertop. You should not hide it inside the structure; it is better to leave free access to the block in case of breakdown.

If you have a fairly good knowledge of electrical engineering, you can make a table with spectacular lighting, which will respond to movement. For this you will need.

There are many creative ideas, used by furniture craftsmen when making masterpieces with their own hands. A bright, original and memorable product that will perfectly decorate a modern interior and create a unique atmosphere is a coffee table with an infinity effect. Making it is not very easy, but it is quite possible if you have some skills in working with wood and glass.

You can place a table with lighting in either office space either at the dacha or at home. LED bulbs used in the assembly of such furniture are absolutely safe for human health, as well as for environment. Such lamps are durable and economical, so using a table with an infinity effect will not lead to increased energy consumption.

The illusion of an endless tunnel is created by using two mirror surfaces and LEDs located between them. The colors of the lamps used can be any, but experts say that red diodes can make the tunnel deeper, since red color is less prone to scattering than other colors.

To control the backlight, you can use the on/off button or a special remote control.

Preparing to start work

To make a coffee table with a mirror, you need to prepare necessary tools and materials. The master will need:

• boards - wood or chipboard;
• sandpaper - it is needed for processing the boards after cutting them (if the material is purchased cut into suitable elements, then there is no need to use sandpaper);
• an ordinary mirror - for a coffee table with a diameter of about 60-70 cm;
• translucent mirror - its width should be approximately 10 cm larger than the width of a regular mirror ( extra size needed so that the glass can be glued to the strips with LEDs); in the absence of a translucent mirror, you can use glass on which a mirror film is glued;
• power supply with USB output;
• self-adhesive LED strip with a length of at least 1.5–2 m;
• wires;
• USB for powering the microcontroller;
• microcontroller and programmer for it;
• self-tapping screws;
• Super glue;
• screwdriver

Some craftsmen prefer to make a table with their own hands using a New Year's garland instead of an LED strip. In this case, there is no need to purchase equipment that is equipped with designs with LED strips (microcontroller, USB).

Tabletop assembly procedure

First, a frame (sidewall) is assembled from 4 boards using self-tapping screws. future design, then this frame is glued on top of the mirror, on its front side. In this case, the size of the frame must correspond to the dimensions of the mirror.

At the next stage, you assemble the frame with LEDs yourself. The outer diameter of the frame can be equal to or greater than the outer diameter of the frame, but the inner diameter should be 1-2 cm less than the inner diameter of the frame on each side. When the frame is ready, with it bottom side, an LED strip is attached along the inner edge. The frame is then attached to the sides with screws. Holes are drilled in the frame through which the wires are routed out.

When all this work is completed, all that remains is to attach the translucent mirror to the frame. It is screwed with special screws. It is advisable to choose screws that can be removed without much difficulty (in case the LEDs need to be replaced). Craftsmen recommend attaching small strips to the edges of the frame, which in height form a single plane with the glass. At the final stage of work, it will be possible to attach an upper frame to these planks, providing reliable fixation countertops.

Not every craftsman can equip a table with such a mirror, because this material is quite rare. Many furniture makers use plexiglass and self-adhesive mirror film, which is applied to the bottom surface of the glass (the one that will be facing the mirror).

Mirror-coated glass is also popular, but it needs to be chosen correctly. You can determine whether mirror-coated glass is suitable for making a coffee table with an infinity effect in the following way: you should place a piece of mirror and a piece of glass in parallel, and place any light source between them and visually evaluate the effect.

Another affordable option, which is often preferred by novice masters - this is the use of conventional window glass. But in this case it will not be possible to achieve a sufficient depth of the endless tunnel. In addition, the observer will be able to see everything inside the table.

One of the most important characteristics What you need to pay attention to when assembling a table from mirrors is the depth of the tunnel. It is determined by two factors:

• the distance between the mirrors (the actual distance should be multiplied by 16 to get the approximate apparent depth of the tunnel; in most cases, the actual distance from the bottom mirror to the top is 75-80 mm);
• throughput translucent material.

To ensure long-term operation of the backlight and save energy, it is recommended to use a power supply with a 50% power reserve.

There is an easier way to make your own table with an infinity effect. In this case, instead of an LED strip, a regular one is used New Year's garland. First, a square or rectangular frame is made from bars, then the number of light bulbs on the garland is counted.

After this, marks are placed on the frame in the places where the light bulbs will be located. It is recommended to place them at a distance of about 2 cm from each other. At the next stage of work, holes for light bulbs are drilled in the frame of the future table.

Then light bulbs are inserted into these holes and secured there. Then you need to glue the frame onto the mirror with your own hands, and glue glass with a mirror film on top of the frame.

When the backlit tabletop is ready, all that remains is to make the base and legs of the table. The legs should be thick enough (about 10 cm in diameter) so that a hole can be drilled inside one of them for the wires. Exiting the wires through the leg is a solution that allows you to make the product as aesthetically pleasing as possible. You can route the wires directly from the tabletop, but this will make the table less beautiful and convenient to use.

When the legs are made, you need to form a through hole in one of them with a diameter of about 5 cm. In the upper part of the leg, you should make two grooves through which the wires will pass, and also cut out a corner hole necessary for fixing the tabletop.

The height of the hole should be equal to the height of the tabletop. The depth of the hole must be calculated individually in each case; it must ensure reliable fixation of the tabletop. Similar corner holes are made on all four legs.

In addition to the legs, you need to prepare the base in which the tabletop will be placed. The width of the base should be such that the base protrudes 8-10 cm on each side of the tabletop placed inside it. Free space around the tabletop is needed to accommodate wires and related equipment.

A hole is formed in each corner of the tabletop into which a leg is inserted. Then an outer frame is attached to the base using self-tapping screws, the height of which is equal to the height of the table top. Then the legs are screwed on, and finished design tabletop fits. The spaces between the tabletop and the outer frame house wires that are routed out through the table leg.

When the assembly of the base and tabletop is completed, all that remains is to close the space with the wires and additionally fix the tabletop inside the base. A special frame is made for this.

The width of each side of the frame is calculated as follows: the width of the trench with wires + the thickness of the outer frame + a few centimeters to ensure the frame fixes the tabletop. This frame is assembled from four blanks and fastened with self-tapping screws. It is then bolted to the outer frame as well as to the LED tabletop frame.

The holes for the bolts must be drilled in advance to avoid delamination of the wood. The design is ready!

Every owner wants to add a touch of originality to their interior. And everyone has their own methods for this. Some people come up with original design rooms, thanks various forms ceiling and walls, while others opt for One of these interior items that will catch the admiring glances of your guests will be a table with an infinity effect.

What is the secret?

The infinity effect is achieved through the use of LED technology. They are the ones who can decorate your home, and in some cases even change it beyond recognition. A table with an infinity effect, the photo of which is presented in this article, is a modern, innovative piece of furniture that can change the idea of ​​design of even the most notorious skeptic.

The secret of visual infinity is hidden in the use of LED backlighting, and color solutions there can be a huge variety. It is this that is built into the space between the reflective surfaces. As a rule, the top mirror is translucent so that the radiation from the LEDs is visible to others.

To control the backlight, use a special remote control or, if you made a table with an infinity effect yourself, an on/off button.

Where can the table be used?

The use of tapes is absolutely safe for human health and the environment, so the table with the infinity effect can be located anywhere. In addition, such lamps are famous for their durability and efficiency. A product with a tunnel effect will serve you well long term, thanks to its reliability and ease of use. This table can be seen in:

• modern apartment;
• country house;
• nightclub, bar or restaurant;
• hotel;
• office.

How to make an infinity table yourself

The price for such a piece of furniture is not encouraging, and the purchase is not always affordable for the average resident of the country. However, you can get an unusual thing if you know how to use tools. Just make a lighted table yourself.

For this you will need following materials and tools:

• boards for the table;
• mirror and glass (the latter can be replaced with a translucent mirror);
• LED Strip Light;
• self-tapping screws;
• screwdriver

All wires are mounted in the table legs.

First of all, you need to develop a drawing, taking into account all the dimensions of the future piece of furniture. From MDF (or wooden boards), mirrors need to be made according to your calculations. Wooden templates with an internal hole there should be 3 pieces, one of which is approximately 1 cm larger inner diameter. This is where the LED strip will be located. The resulting blanks need to be glued together, not forgetting to insert one mirror between the two lower templates. Then you need to carefully smooth all sides and corners.

Next you need to attach the cover. It would be better if it was removable. This will provide access to electricity. This cover for the future table can be decorated to suit your interior. You can paint it or decorate it in any other way.

In the opening of the table cover it is necessary to drill holes that are necessary for attaching the LEDs. Now you can insert the tape into this opening and secure it in a way convenient for you. The best option would be to use glue, the effectiveness of which you will be 100% sure of.

Now you should cover it all with a second mirror, translucent.

All wires are routed through the table legs. To do this, they must have a wide cross-section and through holes.

As a conclusion

To enhance the effect or make it more original, you can put absolutely any object between two mirrors. This is done to ensure that the infinity table fits perfectly into the overall concept of your room.

In addition, you can safely combine LEDs of different shades. Connecting pieces of tape is not difficult even for an inexperienced craftsman.

A similar effect can be used not only to make a table, but also to decorate doors or any other surfaces. A table with an infinity effect, made with your own hands, can be just the beginning.